These instructions find the default gateway IP address on wired and wireless home and small business networks.
How do I reset my IP address in Windows XP?
Larger networks, with more than a single router and simple network hubs , may have more than one gateway and more complicated routing. Open Control Panel , accessible from the Start menu in most versions of Windows. To shorten this process on Windows 10 or Windows 8. Then, skip to Step 4 Windows 10 or Step 5 Windows 8.
Select Network and Internet.
In the Network and Sharing Center window, select Change adapter options. In Windows 8 and 7, click Change adapter settings. In Windows Vista, click Manage network connections. Locate the network connection for the default gateway IP. Windows can connect to multiple networks at the same time, so there may be several connections.
If the network connection is working, exclude any connection that is not connected or disabled.
15 Replies
To determine which connection to use, go to Details view and note the information in the Connectivity column. Double-click the network connection to open an Ethernet Status, Local Area Connection Status, Wi-Fi Status, or another status dialog box, depending on the name of the network connection. If Properties, Devices and Printers, another window, or a notification appears, the network connection does not have a status, meaning it's not connected to a network or the internet. Go to Step 5 and look for a different connection. Select Details.
Configuring Windows to use local DNS server (Windows XP)
If no IP address is listed, the connection you chose in Step 5 may not be the one Windows is using to connect to the internet. Go back to Step 5 and choose another connection.
Use the default gateway IP address to troubleshoot a connection problem, to access the router, or perform other tasks. The ipconfig command is a quick way to find the default gateway IP address.
Use this method if you're experienced working with commands in Windows. Open Command Prompt. Here's an example result of the ipconfig command. The default gateway for the Ethernet connection is listed as If this is too much information, enter ipconfig findstr "Default Gateway" and press Enter. This trims down the data that's returned in the Command Prompt window. However, this method is only helpful if you have one active connection since multiple connections would show the default gateways with no more context on what connection they apply to.
Here is IP logical network Designing Guide. Note: IP address of your computer must be unique. None of the 2 computers in the network can share same IP address, it causes IP address conflict. Note: Default gateway is a router that can route the traffic to the other network or Internet. As an example, www. If not, you can try this free Opendns. You can also check out simple way to check IP address after knowing the way to set IP. Note : If you have a notebook, using static IP at home and the IP assigned by DHCP server at the office, you can make use of alternate configuration to set IP and network information for these 2 different network.
- How to Find Your IP Address on Windows or Mac;
- inmate database florida department of corrections.
- How to Find a Printer's IP Address in Windows XP | taira-kousan.com!
- windows xp pc will not acquiring an IP address - TechRepublic!
- Dynamic IP address - [ IPv4 ];
Set Obtain an IP address automatically on General tab which is same as what I specified above, so that the notebook will be assigned IP addresses automatically at the office. If you are interested, let's learn more about Windows XP here!